General Information

Governance

Forsyth Technical Community College is one of 58 institutions operating in the North Carolina Community College System, a statewide organization of public, two-year and post-secondary educational institutions. The statutes of the state of North Carolina provide for the organization and administration of a community college system under the direction of the state board of community colleges. This 20-member board has full authority to adopt all policies, regulations and standards it deems necessary for the operation of the system. The governor and the General Assembly appoint members of the state board. The state board has three major functions: equitable distribution of funds and fiscal accountability, establishing and maintaining state priorities, and educational program approval and accountability.

Forsyth Technical Community College is governed by a 12-member board of trustees - four appointed by the governor of North Carolina, four appointed by the Winston-Salem/Forsyth County Board of Education and four appointed by the Forsyth County Board of Commissioners. The Student Government Association president serves as a nonvoting member. Trustees are appointed to four-year terms and set local policy for the College.

Accreditation

Forsyth Technical Community College is accredited by the Commission on Colleges of the Southern Association of Colleges and Schools to award associate degrees, diplomas and certificates. Contact the Commission on Colleges at 1866 Southern Lane, Decatur, Georgia 30033-4097 or call 404-679-4500 for questions about the accreditation of Forsyth Technical Community College.

The Commission can be contacted to file a third-party comment during the time of the College's decennial review or to file a complaint if there is evidence appearing to support the College's non-compliance with a requirement or standard. All other inquiries about the College should be addressed directly to the College.

The College is a member in good standing of the American Association of Community Colleges.

Specialized Program Accrediting and Approval Agencies

• Commission on Accreditation of Allied Health Education Programs (CAAHEP), 1361 Park Street, Clearwater, FL 33756, 727.210.2350, www.caahep.org
• Joint Review Committee on Educational Programs in Diagnostic Medical Sonography (JRCEDMS), 2025 Woodlane Drive, St. Paul, MN 55125-2998, 651.731.1582, www.jrcdms.org
• Joint Review Committee on Educational Programs in Nuclear Medicine Technology (JRCNMT), 2000 West Danforth Road, Suite 130 #203, Edmond, OK 73003, 405.285.0546, www.jrcnmt.org
• Joint Review Committee on Education in Radiologic Technology (JRCERT), 20 North Wacker Drive, Suite 2850, Chicago, IL 60606-3182, 312.704.5300, www.jrcert.org
• National Automotive Technicians Education Foundation (NATEF), 101 Blue Seal Drive, Suite 101, Leesburg, VA 20175, 703.669.6650, www.natef.org
• North Carolina Board of Dental Examiners, 506 Airport Boulevard, Suite 105, Morrisville, NC 27560, 919.678.8226, www.ncdentalboard.org
• North Carolina Board of Nursing, P. O. Box 2129, Raleigh, NC 27602, 919.782.3211, www.ncbon.com
• The Electronic Engineering Technology is accredited by the Technology Accreditation Commission of the Accreditation Board for Engineering and Technology (TAC/ABET), 111 Market Place, Suite 1050, Baltimore, MD 21202, 410.347.7700, www.abet.org
• North Carolina Board of Massage and Bodywork Therapy, P. O. Box 2539, Raleigh, NC 27602, 919.546.0050, www.bmbt.org
• The Forsyth Technical Community College Medical Assisting Program is accredited by the Commission on Accreditation of Allied Health Education Programs (CAAHEP), on recommendation of the Curriculum Review Board of the American Association of Medical Assistants Endowment (AAMAE). Commission on Accreditation of Allied Health Education Programs, 20 North Wacker Drive, Suite 1575, Chicago, IL 60606, 312.899.1500, www.aama-ntl.org/endowment

North Carolina Community College Performance Measures

Reported in 2009

* Standard required for accountability and performance funding by the state
M = Met Standard
Data Source: 2009 Critical Success Factors for the NCCCS Chart prepared by Institutional Effectiveness Office June 2009

History

For 50 years, Forsyth Technical Community College ideals have remained the same: to provide quality education and training for the citizens of North Carolina. Forsyth Tech’s first classes began in the fall of 1960. Automotive mechanics, machine shop, electronics and practical nursing were among the first course offerings at the new Winston-Salem/Forsyth County Industrial Education Center, Forsyth Tech’s first name.

Nineteen sixty-three witnessed the establishment of the North Carolina Department of Community Colleges and, with that, the Winston-Salem/Forsyth County Industrial Education Center passed to the new community college system. In 1964 came a new name, Forsyth Technical Institute and commitment to the community grew steadily with the addition of the General Adult Enrichment Courses in 1964-65. Adult Basic Education began at the Institute in the summer of 1965.

The 1970’s brought more change and expansion for Forsyth Technical Institute. The allied health program was created in the fall and winter of 1971-72, offering courses in three areas: nuclear medicine, radiological technology and respiratory therapy. The criminal justice program was added in 1971. And in the fall of 1972, a two-year nursing degree program was added. In 1974 the College Foundation was created to work with alumni to raise funds for buildings, programs and scholarships.

In the 1980’s, expansion led to the acquisition of the Dalton Junior High School site, which became the Institute’s West Campus site in Winston-Salem, and ground was broken for a technology building, Hauser Hall, on the main campus site. Nineteen eighty-five saw the first of two more name changes for Forsyth Technical Institute, with the name changing to Forsyth Technical College, and then, in 1987, to its current name, Forsyth Technical Community College. In 1989, the College Transfer Program began, which allowed the College to serve an even wider portion of the community.

As the College entered the 1990’s, new buildings were added. Bob Greene Hall, with classrooms and laboratories, was dedicated in 1991. The Allman Center, built in 1992, provided both classroom and administrative space. In 1996 the Corporate and Continuing Education Division added two training sites in downtown Winston-Salem to better serve the business and industry sectors. In 1998 two new off-campus centers were added: the Mazie S. Woodruff Center in Northeast Winston-Salem and the Grady P. Swisher Center in Kernersville.

In 2006, the new Technology and Student Services building (approximately 87,000 sq. ft.) was opened. A dental lab and clinic were completed on the first floor of Snyder Hall for the Dental Hygiene and Dental Assisting programs that same year.

The Northwest Forsyth Center (40,000 sq. ft.) opened in the summer of 2008. Located in King, it serves as a training facility for public safety, fire fighters, police and sheriff employees and houses industrial systems technology, certified nursing assistants and criminal justice.

In 2009 Forsyth Tech named two schools in the Health Technologies Division. The Paul M. Wiles School of Nursing and the Len B. Preslar, Jr. School of Allied Health. These schools were named for two men who supported these areas continually with both financial and programmatic support. These are the first two schools named at Forsyth Tech.

Forsyth Tech continues to look at the training needs for the future and is currently a regional Cisco training academy. Through the Thomas H. iTEC (information technology) Forsyth Tech is providing a broad spectrum of technology training to the Piedmont Triad, utilizing traditional classroom and online courses.

Foundation

The Forsyth Tech Foundation was established in 1974 to provide additional financial support for the College through private donations. Re-activated in 1997, the Foundation supports student scholarships, new technology and faculty and staff professional development.

Gifts to the Forsyth Tech Foundation are deductible on federal and state income tax reports, both individual and corporate, up to applicable laws. All gifts, large or small, are appreciated and may be designated for specific programs and projects.

Since 1997, the Forsyth Tech Foundation has added the following endowed scholarships and programs:

Endowed Scholarships:

• Terry Alexander Memorial Scholarship from the Clemmons Rotary
• Don Angell Nursing Scholarship
• John P. Arrowood Sr. Scholarship
• Branner Dixson Baldwin Scholarship in Practical Nursing
• Daniel Bradley Barrow Scholarship
• Mary B. Lauerman Nursing Scholarship
• David W. Lewis Scholarship
• Lucent Technologies Pioneers Scholarships (2)
• Catherine Kiser Marshall Scholarship in Nursing (Several)
• The Medlin Scholarship Fund
• Steven R. Moser Paralegal Scholarship
• Wachovia General Scholarship
• Spencer Waggoner Scholarship (Several)
• Hilda R. and William H. Moser Scholarship

Endowed Programs:

• Thomas H. Davis iTEC Center
• William Henry Moser Family Paralegal Program
• James A. Rousseau II Minority Male Mentoring Program
• Shugart Women’s Center at Forsyth Tech

Endowed Faculty Awards:

• C. David Kepple Memorial Faculty Award
• Montgomery/Tucker Fund

Alumni Association

The Forsyth Tech Alumni Association begins with...you! The Forsyth Tech Alumni Association was formed in 1996. The board of directors established policies and the following mission statement: “to support and advance the growth and development of the College; to promote the personal, educational and professional interests of alumni; and to encourage a spirit of shared interests, fellowship and active involvement among alumni, the community and the College.”

The Forsyth Tech Alumni Association continues that lifelong connection between its graduates and the College.

If you are interested in becoming an active member of the association, please contact the Alumni Relations Office at 336.734.7307.